因編輯器過濾了一些字符，比如，所以下面的腳本可能會運行錯誤。?？垂偬砑舆@個字符就可以了。
vbs腳本的功能呢是很多的，不過有時候我們只需要其中的某些功能，今天我突然想研究下怎么用vbs腳本實現添加程序到自啟動項......
首先來一段吧...
復制代碼 代碼如下:
'==========================================================================
'
' VBScript Source File -- Created with SAPIEN Technologies PrimalScript 4.1
'
' NAME: add2run01.vbs
'
' AUTHOR: shile
' DATE : 2008-12-13
'
' COMMENT: vbs實現添加程序到自啟動項
'
'==========================================================================
On Error Resume Next '出錯繼續執行下個命令
dim ws
Set ws=CreateObject("Wscript.Shell")
ws.RegWrite "HKLM\Software\Microsoft\Windows\CurrentVersion\Run\cmd","cmd.exe"
竟然被360安全衛士攔截了，不過點擊同意就可以了。在autoruns里面刷新后還是不能顯示這個啟動項，看來這軟件不太完美.
功能太弱了，我想增強一下....
首先，彈個窗口詢問詢問添加什么程序到啟動項，并且詢問下啟動項的鍵值。
復制代碼 代碼如下:
'==========================================================================
'
' VBScript Source File -- Created with SAPIEN Technologies PrimalScript 4.1
'
' NAME: add2run02.vbs
'
' AUTHOR: shile
' DATE : 2008-12-13
'
' COMMENT: vbs實現添加程序到自啟動項
'
'==========================================================================
On Error Resume Next '出錯繼續執行下個命令
Dim ws
Set ws=CreateObject("Wscript.Shell")
Dim runKey,runPath
runKey = InputBox("輸入自啟動項鍵值名稱","請輸入")
runPath = InputBox("輸入相應的程序路徑","請輸入")
'ws.RegWrite "HKLM\Software\Microsoft\Windows\CurrentVersion\Run\cmd","cmd.exe"
ws.RegWrite "HKLM\Software\Microsoft\Windows\CurrentVersion\Run\"runKey,runPath
'提示下
MsgBox "添加"runKey""runPath">成功",vbYes,"恭喜!"
本來要用vbOK的，但是發現還是兩個按鈕，還是vbYes好！
功能還是不太強的，如果能判斷是否存在已經有的項，是否替換確認，那么就比較完善了！
繼續下去...
復制代碼 代碼如下:
'==========================================================================
'
' VBScript Source File -- Created with SAPIEN Technologies PrimalScript 4.1
'
' NAME: add2run03.vbs
'
' AUTHOR: shile
' DATE : 2008-12-13
'
' COMMENT: vbs實現添加程序到自啟動項
'
'==========================================================================
On Error Resume Next '出錯繼續執行下個命令
dim ws
Set ws=CreateObject("Wscript.Shell")
Dim runKey,runPath
runKey = InputBox("輸入自啟動項鍵值名稱","請輸入")
runPath = InputBox("輸入相應的程序路徑","請輸入")
Dim temp,ret
temp = ws.RegRead("HKLM\Software\Microsoft\Windows\CurrentVersion\Run\"runKey)
'MsgBox temp
If temp > Empty Then
ret = MsgBox( "鍵值"runKey"已經存在,其值為"temp",是否替換為新的值"runPath, vbOKCancel, "提示!")
If ret = vbOK Then
ws.RegWrite "HKLM\Software\Microsoft\Windows\CurrentVersion\Run\"runKey,runPath
MsgBox "修改"runKey"值為"runPath"成功",vbYes,"恭喜!"
End If
Else
ws.RegWrite "HKLM\Software\Microsoft\Windows\CurrentVersion\Run\"runKey,runPath
MsgBox "添加"runKey""runPath">成功",vbYes,"恭喜!"
End If
當然了，啟動項在注冊表有很多地方，就不一一說明了......
