1、手上目前擁有數據集是一大坨，沒有train，test，val的劃分
如圖所示
2、目錄結構：
|---data
|---dslr
|---images
|---back_pack
|---a.jpg
|---b.jpg
...
3、轉換后的格式如圖
目錄結構為：
|---datanews
|---dslr
|---images
|---test
|---train
|---valid
|---back_pack
|---a.jpg
|---b.jpg
...
4、代碼如下：
4.1 先創建同樣結構的層級結構
4.2 然后講原始數據按照比例劃分
4.3 移入到對應的文件目錄里面
import os, random, shutil
def make_dir(source, target):
'''
創建和源文件相似的文件路徑函數
:param source: 源文件位置
:param target: 目標文件位置
'''
dir_names = os.listdir(source)
for names in dir_names:
for i in ['train', 'valid', 'test']:
path = target + '/' + i + '/' + names
if not os.path.exists(path):
os.makedirs(path)
def divideTrainValiTest(source, target):
'''
創建和源文件相似的文件路徑
:param source: 源文件位置
:param target: 目標文件位置
'''
# 得到源文件下的種類
pic_name = os.listdir(source)
# 對于每一類里的數據進行操作
for classes in pic_name:
# 得到這一種類的圖片的名字
pic_classes_name = os.listdir(os.path.join(source, classes))
random.shuffle(pic_classes_name)
# 按照8：1：1比例劃分
train_list = pic_classes_name[0:int(0.8 * len(pic_classes_name))]
valid_list = pic_classes_name[int(0.8 * len(pic_classes_name)):int(0.9 * len(pic_classes_name))]
test_list = pic_classes_name[int(0.9 * len(pic_classes_name)):]
# 對于每個圖片，移入到對應的文件夾里面
for train_pic in train_list:
shutil.copyfile(source + '/' + classes + '/' + train_pic, target + '/train/' + classes + '/' + train_pic)
for validation_pic in valid_list:
shutil.copyfile(source + '/' + classes + '/' + validation_pic,
target + '/valid/' + classes + '/' + validation_pic)
for test_pic in test_list:
shutil.copyfile(source + '/' + classes + '/' + test_pic, target + '/test/' + classes + '/' + test_pic)
if __name__ == '__main__':
filepath = r'../data/dslr/images'
dist = r'../datanews/dslr/images'
make_dir(filepath, dist)
divideTrainValiTest(filepath, dist)
補充：pytorch中數據集的劃分方法及eError: take(): argument 'index' (position 1) must be Tensor, not numpy.ndarray錯誤原因
在使用pytorch框架時，難免需要對數據集進行訓練集和驗證集的劃分，一般使用sklearn.model_selection中的train_test_split方法
該方法使用如下：
from sklearn.model_selection import train_test_split
import numpy as np
import torch
import torch.autograd import Variable
from torch.utils.data import DataLoader
traindata = np.load(train_path) # image_num * W * H
trainlabel = np.load(train_label_path)
train_data = traindata[:, np.newaxis, ...]
train_label_data = trainlabel[:, np.newaxis, ...]
x_tra, x_val, y_tra, y_val = train_test_split(train_data, train_label_data, test_size=0.1, random_state=0) # 訓練集和驗證集使用9:1
x_tra = Variable(torch.from_numpy(x_tra))
x_tra = x_tra.float()
y_tra = Variable(torch.from_numpy(y_tra))
y_tra = y_tra.float()
x_val = Variable(torch.from_numpy(x_val))
x_val = x_val.float()
y_val = Variable(torch.from_numpy(y_val))
y_val = y_val.float()
# 訓練集的DataLoader
traindataset = torch.utils.data.TensorDataset(x_tra, y_tra)
trainloader = DataLoader(dataset=traindataset, num_workers=opt.threads, batch_size=8, shuffle=True)
# 驗證集的DataLoader
validataset = torch.utils.data.TensorDataset(x_val, y_val)
valiloader = DataLoader(dataset=validataset, num_workers=opt.threads, batch_size=opt.batchSize, shuffle=True)
注意：如果按照如下方式使用，就會報eError: take(): argument 'index' (position 1) must be Tensor, not numpy.ndarray錯誤
from sklearn.model_selection import train_test_split
import numpy as np
import torch
import torch.autograd import Variable
from torch.utils.data import DataLoader
traindata = np.load(train_path) # image_num * W * H
trainlabel = np.load(train_label_path)
train_data = traindata[:, np.newaxis, ...]
train_label_data = trainlabel[:, np.newaxis, ...]
x_train = Variable(torch.from_numpy(train_data))
x_train = x_train.float()
y_train = Variable(torch.from_numpy(train_label_data))
y_train = y_train.float()
# 將原始的訓練數據集分為訓練集和驗證集，后面就可以使用早停機制
x_tra, x_val, y_tra, y_val = train_test_split(x_train, y_train, test_size=0.1) # 訓練集和驗證集使用9:1
報錯原因：
train_test_split方法接受的x_train,y_train格式應該為numpy.ndarray 而不應該是Tensor，這點需要注意。
以上為個人經驗，希望能給大家一個參考，也希望大家多多支持腳本之家。
您可能感興趣的文章:- 使用PyTorch將文件夾下的圖片分為訓練集和驗證集實例
- Pytorch 使用CNN圖像分類的實現
- pytorch加載自己的圖像數據集實例
- python中如何實現將數據分成訓練集與測試集的方法
